Processor positioning and core functions
DSAO110 57120001-AT/1 is the main processing unit of ABB AC 800PEC controller, which belongs to the power electronics dedicated controller of ABB 800xA automation platform. Its core positioning is:
High-speed real-time control: meet the microsecond response requirements of power electronic equipment (such as inverters, SVG, STATCOM).
Multi-task collaborative processing: execute control algorithms, communication management, fault diagnosis and other tasks at the same time.
Safety redundancy support: optional dual controller redundant configuration to ensure high system availability.
Processor hardware architecture
1. Core chip
Processor model: dual-core ARM Cortex-A9 (32-bit architecture).
Main frequency: 1.2GHz (single-core maximum performance).
Coprocessor: integrated DSP (digital signal processor) module, specializing in processing power electronics algorithms (such as PWM generation, coordinate transformation).
2. Memory and Storage
RAM: 512MB DDR3 (for real-time data cache).
Flash: 2GB (for storing firmware, control logic and historical data), support expansion to 8GB.
Non-volatile storage: built-in EEPROM to save key parameters (such as PID setting values).
3. Interface and expansion
Communication interface:
2 × 10/100Mbps Ethernet (supports Modbus TCP, PROFINET).
1 × RS232/RS485 serial port (for debugging or connecting old equipment).
I/O expansion:
Basic version: 16DI/16DO + 8AI/4AO.
Expandable to: 64DI/64DO + 32AI/16AO (via plug-in module).
Fieldbus: supports PROFIBUS-DP, CANopen, DeviceNet (requires additional modules).
Software and algorithm support
1. Operating system
ABB Control Builder Safe: Based on VxWorks real-time kernel, supports deterministic task scheduling.
Development environment:
Graphical programming (function block diagram, ladder diagram).
C/C++ high-level language support (for custom algorithms).
2. Built-in algorithm library
Special function blocks for power electronics:
Space vector modulation (SVPWM).
Direct torque control (DTC).
Harmonic compensation (5th/7th harmonic suppression).
General control algorithm:
PID controller (supports self-tuning).
Speed/position closed-loop control.
3. Safety function
STO (Safe Torque Off): Complies with IEC 61800-5-2 standard.
Safety integrity level: SIL 2 (expandable to SIL 3).
Data encryption: Supports AES-128 communication encryption (to prevent unauthorized access).
V. Typical application scenarios
1. Industrial drive control
Multi-motor synchronization: paper machine, textile machinery, metallurgical rolling mill (8-axis synchronization is required).
High-performance frequency conversion: energy-saving control of centrifugal compressors, fans, pump loads (supports V/F, vector control mode).
2. Power electronic equipment
Static VAR generator (SVG): dynamically compensates for grid reactive power and improves power factor to 0.99.
Active power filter (APF): compensates for 2~50th harmonics and meets IEEE 519 standards.
Energy storage converter (PCS): battery charge and discharge management to achieve peak shaving and valley filling.
3. Renewable energy
Photovoltaic inverter: maximum power point tracking (MPPT) control, efficiency >98.5%.
Wind power converter: double-fed or full-power converter control, supports low voltage ride-through (LVRT).
Maintenance and troubleshooting
1. Daily maintenance
Heat dissipation check:
Ensure that the fan is running normally (speed >3000 RPM).
Clean the dust in the control cabinet to avoid overheating (operating temperature ≤60°C).
Firmware update:
Upgrade the firmware through ABB 800xA Configuration Studio (version number format: Vx.y.z).
Back up the configuration file before upgrading (to prevent data loss).
Status monitoring:
Read the processor load rate through the Ethernet interface (normal should be <70%).
Check the I/O module status indicator (green is normal).
Summary
ABB AC 800PEC processor (DSAO110 57120001-AT/1) is a high-performance processor designed for power electronic control. With its dual-core architecture, real-time operating system and rich algorithm library, it is widely used in industrial drives, renewable energy and grid compensation. When purchasing, you need to choose the configuration according to the project requirements and pay attention to daily maintenance to extend the service life.
Related product recommendations:
HS810 3BDH000305R0101
3BHB009884R0021
S-073N 3BHB009884R0021
3BHL000986P0006
5SDF1045H0002
5SDF0860H0003
PHARPS32200000
GFD563A102 3BHE046836R0102
3BHE046836R0102
3BHE009681R0101
5SHY4045L0001
5SHY4045L0001 3BHE009681R0101 GVC750BE101
3BHB030310R0001
5SHY4045L0006 3BHB030310R0001
3BHE037864R0108
UFC911B108 3BHE037864R0108
PPD513AOC-100440 3BHE039724R0C3D 800 D513
More…
There are no reviews yet.